FAST-TUBE™ - PERFECT
COLUMN FORM FOR AUGURED HOLES
1.
Cut a 1x2 about 2' longer than
the Fast-Tube™. Center the tube weld over the
1x2 and nail the top and bottom ends of the weld to
the 1x2 using 3/4" shingle nails. For tubes
longer than 5', staple along the weld at 18" on center
with 3/8" staples.
The 1x2
can also be placed on the inside of the tube if
desired.
2.
Place the Fast-Tube in the hole
to the correct depth...
3.
And fill with concrete.
4.
Brace 1x2 if necessary. A perfect column every time.
(Thanks to Henry Van Delft of Sunset Builders,
Surrey, BC.)
Fast-Tube™ polyethylene fabric
provides the perfect slip plane to eliminate frost
uplift of the concrete column.
