STANDARD FOOTING

1. Drive pairs of wood or steel stakes in the ground every 6' to 10' spaced the footing width apart.

2. Using a laser or builder's level, nail (or screw) the 2x4s to the inside of the stakes at the height of the desired footing.

3. Unroll Fastfoot® between the 2x4s, and staple in the correct position using the colored adjustment lines and a hammer tacker with 3/8" staples.

4. Place concrete.

Click for residential video

CLOSE

Click here to download the Fastfoot® Installation Manual (PDF)

Click here for a technical update on folded corners (thanks to Rick Umpierre, Esko, Minnesota).

Click here for a PowerPoint presentation

MONOPOUR FOOTING

The beauty of Fastfoot® MP is its simplicity: it is the strength and light weight of the ICF block that forms the footing. No other concrete wall form can do this - not plywood, not steel and not aluminum. Fastfoot® MP gives the ICF block an unprecedented cost advantage over conventional wall forms.

Click here for installation details on the MP system.